At Pegasus Aeromarine Inc., we can provide you with all of the materials you need from the most basic thermal kit to a kit loaded with isolators, dampers, absorbers, and barriers.
We know that trying to figure out how to best acoustically treat your light aircraft can be challenging. There are many products and determining the best for your needs is time consuming and technical enough to be a bit intimidating. We've researched the many ways to reduce the noise in an airplane, strongly believe that the best solution is a systematic approach, and in addition to information on our products, have included a robust educational section on this web site for those of you who wish to education yourself.
 |
We have precut kits for the RV-10, Legacy, and Harmon F-1 (with additional precut kits in the development stage). Our precut kits are divided into 3 levels of acoustic treatment that allow YOU to decide how much treatment you want, at what weight, and at what price. |
|
We offer a series of "generic" kits that are designed to fit most 2 place side by side, 2 place tandem, and 4 place aircraft. These have dampers, absorbers, isolators, and in general, everything you need to make a total acoustic system for your aircraft that rivals custom private jet interiors. Each area of the aircraft has sub-kits designed to fit the unique needs of each area. |
|
We are your source for raw materials for kits you design, (there should be enough acoustic educational information on our web site to allow you to make a really informed decision as to how best you want to treat your aircraft). |
|
As always, we can also design a custom kit for your aircraft. |
Note that what we REALLY are doing is selling acoustic SYSTEMS for light and home built aircraft. Both the precut and the "generic" kits from Pegasus Aeromarine Inc. are really designed to treat noise and vibration together so that you end up with a much better overall solution than any single treatment can achieve. I am sure that once you look at how we have designed sub-kits for EACH area of the aircraft with three levels of treatment, we have added a level of sophistication never achieved before and changed the way that acoustic treatments are purchased and evaluated.
|
If you need you need parts manufactured in carbon/epoxy fiberglass/vinylester for aero or marine applications, check out our page on Composites. |
Optional IZIT™ Leather covers are available for most sections, as appropriate.
